cable lifeline overhead clamped on steel beams with lindapter

SecuRope cable lifeline on steel beams

Working at height legislation EN795:2012 Type C | CEN/TS 16415:2013


The NEO SecuRope lifeline is clamped to beams. Using this type of fastening enables a solid fixation of the lifeline without drilling.Particularly useful for industrial configurations, the SecuRope NEO lifeline with can stop a fall with very low cable deflection. Fallprotec’s engineering department can design & calculate special brackets for any size of beam and project requirement.


  • Up to 4 users
  • Easy and quick installation
  • Freehand system
  • Undeformable system
  • Harmonized design for standard beams with a flange from 50 to 300mm
  • Smooth movements along the lifeline. The glider passes smoothly over NEO anchor with a retractable fall arrester
  • Stainless steel
  • Energy absorbing on intermediate anchors
  • Clamping perpendicularly or in parallel to the axis of the exerted force
  • Compatible with SecuRope, SecuRail, SecuRail Pro and SafeAccess


  • Fall arrest
  • Fall restraint
  • Maintenance of industrial halls (e.g. gantry cranes and overhead crane systems)

SecuRope horizontal overhead on steel beams

Energy absorber LDV032
End anchor LDV002
Clamped bracket for beam IDF050. No perforation needed
Glider for overhead configuration LDV141. Super smooth gliding
Fixing assembly for overhead lifeline LDV134
NEO anchor LDV043 with energy absorption by shear pin breaking
Line Tensioner LDV137
SecuRope horizontal overhead on steel beams

Fixing assembly with standard plates

Fixing assembly for fastening on a steel beam using a counter plate. Also usable on wood and on concrete.
Assembly for fastening on a steel beam using clamps. Two range of clamps exist, depending on the direction of the force applied.
For vertical beams high slip resistant clamps are available. The supports are compatible with all types of Fallprotec anchoring devices. 

IDF050, IDF051 and IDF055

End anchor lifeline on steel beam with counter plate
Intermediate anchor lifeline on steel beam with lindapter clamps

Fixing assembly with post

Fallprotec designs, calculates and manufactures customized brackets to meet the site requirements. The base plate matches the beam sizes. It is either fixed with clamps or with a counter-plate. 
The height of the post allows the cable to pass besides or below any obstacles such as pipes and electrical cables.  
Non deformable design in coated steel, galvanized steel or stainless steel depending of the environment. 

IDF019 and MHS032

Steel post attached to steel beam for lifelines